Liefern und montieren von: tML® - FO Micro Distribution Trunk Cable both sides 1x MPO/MTP® Female 12G50/125µ OM4 LSOH, Type C, Length: xxx **tML® - tde Modular Link tML® is a patented, modular cabling system consisting of the three key components module, trunk cable and rack mount enclosure. The system components are 100 percent manufactured, pre-assembled and tested in Germany. They enable plug-and-play installation on site – especially in data centres, but also in industrial environments – within the shortest possible time. Heart of the system are the rear MPO/MTP® and Telco connectors, which can be used to connect at least six or twelve ports at a time. Depending on the module configuration, transfer rates of up to 200G are currently possible with SR4. The fibre optic and TP modules can be used together in a module carrier with a very high port density. The tde offers its tML® cabling system as a proven tML® standard system and in the highly innovative variants tML® Xtended, tML® 24 System and now tML® 32 System for extreme scalability and very easy migration to higher transmission rates such as 40G, 100G, 200G and 400G. **tML® Standard - FO Trunk Cables MPO/MTP® The tML® - FO Micro Distribution trunk cable is intended for the connection of two tML®- FO Modules. **TECHNISCHE_DATEN The tML®- FO trunk cable is preterminated with MPO/MTP®connectors on both ends. The Cable is very slim and flexible. The end faces of the connectors are optimized by means of Lasercleaving and machine polish. The MPO/MTP®plug has a defined fiber hieght of 1 - 3.5µ. The max. adjacent fiber height difference is 0.2µm and for all fibers 0.3µm. All system components (modules, trunk cables and patch cords) are co-ordinated for the reaching of the performance particularly. The module is marked with sequential serial number and article number. Cable Round cable, 3 mm, loose tube, LSOH, magenta Option unsensitive ClearCurve® Corning fiber Connectors MPO/MTP®Female Push Pull (magenta) Pin out Crossover (TIA/EIA-568-B.1 Methode C) Tests Interferometer, Insertion Loss, Return Loss and Visual Final Inspection; all measured values are electronically archived   QS-Managementsystem ISO 9001, ISO 14001 and TL 9000 ***FO Connectors The end faces of the connectors are optimized by means of Lasercleaving and machine polish. The MPO/MTP® plug has a defined fiber height of 1 - 3.5µ. The max. adjacent fiber height difference is 0.2µm and for all fibers 0.3µm. Connector: Type MPO/MTP® Female Push Pull Locking (Magenta) Ferrule 12 Fiber MM Elite® ferrule, PPS Boot colour Black Manufacturer tde/US Conec Optical Performance: Fiber Type Wavelength Insertion loss typ. Insertion loss max. Return loss min. 50/125µ OM4 MPO/MTP® 850 /1300 nm ≤ 0.12 dB 0.25 dB 35 dB ***FO Cables Standards EN 50173-5   IEC 60794-2-20   ISO/IEC 24764 Flame resistance IEC 60332-1-2   IEC 60332-2-2   IEC 60754-1   IEC 60754-2   IEC 61034 Cable construction: Type IVH12G50-OM4 Loose tube 12 coated fibers within PVC-core tube Wall thickness PVC-tube 0.20 mm – 0.25 mm  Fiber type MM-OM4, 50/125µ, Corning ClearCurve OM4 Strength members Aramid yarn Outer jacket LSZH (Halogen free, low smoke, flame retardant thermoplastic compound) Jacket color Magenta, RAL 4003 Identification "t d e – IVH12G50-MPO-OM4 LSZH" and sequential meter marking + Lot number Physical properties: Outer diameter cable 3.0 ± 0.1 mm Diameter PVC-core tube 1.8 ± 0.1 mm Max. tensile load 300 N Min. bending radius 30 mm Temperature range (storage, installation, operation) -20°C to +70°C QS-Managementsystem nach ISO 9001/2008, ISO 14001 und TL 9000 Art.-Nr.: TML-MP/MP50I12G4-xxx Hersteller: tde - trans data elektronik GmbH Stück_____________ Einzelpreis__________ Gesamtpreis__________