Liefern und montieren von:

tBL® - TP Trunk Cable both ends preterminated 6x termination block Cat.6A UC Future
24x2xAWG26 LSHF

**tBL® - tde Basic Link (TP)

tBL® tde Basic Link (TP) is a complete system solution for structured cabling in Cat6A
for transfer rates of up to 10GbE in real time. The tBL® - cabling link corresponds to a
permanent link in accordance with ISO / IEC 11801 (EN 50173). The RJ45 modules are
available in the form factors  Keystone (KS) and Data Center (DC). The compact design of
the 6fold RJ45 DC module allows a high packing density of up to 48 RJ45 ports on 1U. The
RJ45 module is connected to the tBL® - cable termination block by simply plugging. The
slim cable termination block can be easily assembled on the cable by using the tBL® -
crimp tool and is suitable for preterminated cables. The modular design of individual
RJ45 modules are interchangeable at any time without termination. A cost effective
alternative product is the RJ45 keystone module without cable termination block in the
tool-less design.


The system solution is complemented by an extensive portfolio of carrier systems. These
include design-capable data outlets, floor box frames, Consolidation points, DIN rail
modules and patch panels in 1/2 and 1U.



**TP Trunk Cables

**TECHNISCHE_DATEN

xxxx  Length in cm

***TP Termination Block

Construction                    plastic with insulation displacement connection
Gold plating termination block  30 µ"
Color                           transparent white
Application                     Flex cable AWG 26 - AWG 27, alternative AWG 26 Solid Wire
                                Plug bears small flag-like installation guide with color
                                codes for pin-out according to EIA/TIA 568 A and B.

***TP Cable

Construction:

Type            UC FUTURE COMPACT AWG26/1 Cat.7 S/FTP 24P
Conductor       Bare copper wire, diamter 0.4 mm (AWG26)
Insulation      Foam-skin PP, diameter 1.0 mm
Twisting        2 insulated wires to the pair
Pair screening  Pet-Al foil around each pair
Stranding       6 (5+1) bundles with 4 foiled pairs blue, orange, green, brown
                Coloured tapes are around each bundle
Screen          Tinned copper braid 85% coverage
Sheath          LSHF-FR, diameter 13.9 mm

Application
IEEE 802.3: 10Base-T; 100Base-T; 10GBase-T, ISDN; xDSL
IEEE 802.5 16 MB; ISDN; TPDDI; ATM155Mbit/s
The conductor diameter is smaller compared to the standard installation cables. This
leads to an increased attenuation and therefore the
operating distance is reduced (60m instead of 90m installation cable in standard
permanent link).

Standards
IEC 61156-6 work area cable
ISO/IEC 11801 2nd ed.
EN 50173-5
EN 50288-4-2

Flame resistance
PVC IEC 60332-1
LSHF-FR IEC 60332-3-24; IEC 60754-2; IEC 61034 ; EN 50399 Class Dca

Mechanical properties:

Minimum bending radius  Without load        ≥ 55 mm
                        With load           ≥ 110 mm
Temperature range       During operation    -20°C up to +60°C
                        During installation  10°C up to +40°C

Electrical properties at 20°C:

Loop resistance                              ≤ 280 Ω/km
Resistance unbalance                         ≤ 2%
Test voltage                     core/core   1000 VDC 1 min
                                 core/screen 1000 VDC 1 min
Capacitance                      800 Hz      Nom. 44 nF/km
Capacitance unbalance                        ≤ 1600 pF/km
Impedance                        100 MHz     100 Ω± 5 Ω
Nominal velocity of propagation              ca. 76%
Insulation resistance            500 V       ≥ 2000 MΩkm
Transfer impedance               at 1 MHz    ≤ 5 mΩ /m
                                 at 10 MHz   ≤ 5 mΩ /m
                                 at 30 MHz   ≤ 10 mΩ /m

Electrical Data (nominal) acc. to Cat.7 (at 20°C):

F MHZ  Atten- uation    NEXT dB PS- NEXT dB ELFEXT dB/100m PS- ELFEXT       Return  loss dB
       dB/10m                                              dB/100m          
1.0    0.3              90      87          80             77               23
4.0    0.6              90      87          80             77               24
10.0   1.0              90      87          80             77               25
16.0   1.3              90      87          76             73               25
20.0   1.4              90      87          74             71               25
31.2   1.8              90      87          70             67               25
62.5   2.6              90      87          64             61               23
100.0  3.2              87      84          60             57               21
125.0  3.6              85      82          58             55               20
155.5  4.0              84      81          56             53               19
175.0  4.3              83      80          55             52               19
200.0  4.6              82      79          54             51               18
250.0  5.1              81      78          52             49               18
300.0  5.6              80      77          50             47               17
450.0  6.9              77      74          47             44               17
600.0  7.9              75      72          44             41               17

Technical Data:

Designation       J-02YS(ST)CH
Type              24x2x0.4PiMF
Outer diameter    13.9 mm
Fire load         2.171 MJ/km
Fire load         0.603 kWh/m
Reaction to Fire  Dca-s2, d2, a1
Weight            230 kg/km
Copper content    115 kg/km
Tensile force     500 N



QS-Managementsystem nach ISO 9001/2008, ISO 14001 und TL 9000

Art.-Nr.:		T-TKT/TKT-N26Cxxxx
Hersteller:		tde - trans data elektronik GmbH


Stück_____________               Einzelpreis__________              Gesamtpreis__________