Liefern und montieren von:

tML® - RJ45 DC 6fold Module Cat.6A ISO/IEC with LID

**tML® 24

tML® 24 is a patented, modular cabling system consisting of the three key components
module, trunk cable and rack mount enclosure. The system components are 100 percent
manufactured, pre-assembled and tested in Germany. They enable plug-and-play installation
on site – especially in data centres, but also in industrial environments – within the
shortest possible time. Heart of the system are the rear MPO/MTP® 24 fiber and Telco
connectors, which can be used to connect at least six or twelve ports at a time.
Depending on the module configuration, transfer rates of up to 400G are currently
possible with SR4. The fibre optic and TP modules can be used together in a module
carrier with a very high port density. The tde offers its tML® cabling system as a proven
tML® standard system and in the highly innovative variants tML®Xtended and now tML® 32
for extreme scalability and very easy migration to higher transmission rates such as 40G,
100G, 200G and 400G.



**tML® - tde Modular Link

tML® is a patented, modular cabling system consisting of the three key components module,
trunk cable and rack mount enclosure. The system components are 100 percent manufactured,
pre-assembled and tested in Germany. They enable plug-and-play installation on site –
especially in data centres, but also in industrial environments – within the shortest
possible time. Heart of the system are the rear MPO/MTP® and Telco connectors, which can
be used to connect at least six or twelve ports at a time. Depending on the module
configuration, transfer rates of up to 200G are currently possible with SR4. The fibre
optic and TP modules can be used together in a module carrier with a very high port
density. The tde offers its tML® cabling system as a proven tML® standard system and in
the highly innovative variants tML® Xtended, tML® 24 System and now tML® 32 System for
extreme scalability and very easy migration to higher transmission rates such as 40G,
100G, 200G and 400G.



**tML® Xtended

tML® Xtended is a patented, modular cabling system consisting of the three key components
module, trunk cable and rack mount enclosure. The system components are 100 percent
manufactured, pre-assembled and tested in Germany. They enable plug-and-play installation
on site – especially in data centres, but also in industrial environments – within the
shortest possible time. Heart of the system are the rear MPO/MTP® 12 fiber and Telco
connectors, which can be used to connect at least six or twelve ports at a time.
Depending on the module configuration, transfer rates of up to 200G are currently
possible with SR4. The fibre optic and TP modules can be used together in a module
carrier with a very high port density. The tde offers its tML® cabling system as a proven
tML® standard system and in the highly innovative variants tML® 24 system and now tML® 32
system for extreme scalability and very easy migration to higher transmission rates such
as 40G, 100G, 200G and 400G.



**tML® - TP Trunk Cables

**TECHNISCHE_DATEN

System platforms  tML®/ tSML
                  4x tBL® - 6fold Modules can be integrated in a tSML - TP Module.
                  1x tBL® - 6fold Module can be integrated in a tML® - TP Module.
Equipping         6x tBL® RJ45 DC Module Cat.6A

***tBL® - RJ45 DC-Module Cat.6A ISO/IEC with LID w/o termination block

Mechanical properties:

Type                            RJ45 Jack shielded LID
Connector standard              IEC 60603-7-5-1
Installation dimension          19.3 x 14.7 mm
Mating force                    ≤30 N
Mating cycles (RJ45 side)       ≥750
Mating cycles (opposite side)   ≥100
Housing material                nickel-plated die-cast zinc
Insulation components material  PC aqua opak
Gold plating in contact area    30 µ"
Contacting                      AWG 27-22
Cable diameter                  5-10 mm

Environmental requirements:

Connection class   IP20
Temperature range  -40°C to +70°C

Electrical properties:

Contact resistance                                 ≤20 mΩ
Insulation resistance between contacts             ≥500 MΩ
Dielectric withstanding voltage contact – contact  ≥1000 V DC/AC
Dielectric withstanding voltage contact – screen   --
Current-carrying capacity at 50°C                  1.25 A
PoE+ per IEEE 802.3at                              PoE+

Transmission characteristics:

10 GbE  supported
Cat.6A  ISO/IEC 11801 AM1 and AMD2, Link length: >1 m

LiD Function:

supply voltage  12 V DC
lightdetection  ≥200 m
light exits     ≤20



QS-Managementsystem nach ISO 9001/2008, ISO 14001 und TL 9000

Art.-Nr.:		TML-RJ45DCLX6
Hersteller:		tde - trans data elektronik GmbH


Stück_____________               Einzelpreis__________              Gesamtpreis__________