Liefern und montieren von: tML® 24 - FO Trunk Cable 4x 24F MPO w. Pins/4x 24F MPO w. Pins 96E9/125µ OS2 LSHF Type A, Length: xx in m **tML® 24 tML® 24 is a patented, modular cabling system consisting of the three key components module, trunk cable and rack mount enclosure. The system components are 100 percent manufactured, pre-assembled and tested in Germany. They enable plug-and-play installation on site – especially in data centres, but also in industrial environments – within the shortest possible time. Heart of the system are the rear MPO/MTP® 24 fiber and Telco connectors, which can be used to connect at least six or twelve ports at a time. Depending on the module configuration, transfer rates of up to 400G are currently possible with SR4. The fibre optic and TP modules can be used together in a module carrier with a very high port density. The tde offers its tML® cabling system as a proven tML® standard system and in the highly innovative variants tML®Xtended and now tML® 32 for extreme scalability and very easy migration to higher transmission rates such as 40G, 100G, 200G and 400G. **tML® - tde Modular Link tML® is a patented, modular cabling system consisting of the three key components module, trunk cable and rack mount enclosure. The system components are 100 percent manufactured, pre-assembled and tested in Germany. They enable plug-and-play installation on site – especially in data centres, but also in industrial environments – within the shortest possible time. Heart of the system are the rear MPO/MTP® and Telco connectors, which can be used to connect at least six or twelve ports at a time. Depending on the module configuration, transfer rates of up to 200G are currently possible with SR4. The fibre optic and TP modules can be used together in a module carrier with a very high port density. The tde offers its tML® cabling system as a proven tML® standard system and in the highly innovative variants tML® Xtended, tML® 24 System and now tML® 32 System for extreme scalability and very easy migration to higher transmission rates such as 40G, 100G, 200G and 400G. **tML® 24 - FO Trunk Cables MPO/MTP® The tML® - FO trunk cable is intended for the connection of two tML®24 - FO Modules. **TECHNISCHE_DATEN The tML®- FO trunk cable is preterminated with MPO/MTP® connectors on both ends. The end faces of the connectors are optimized by means of Lasercleaving and machine polish. The MPO/MTP®plug has a defined fiber hieght of 1 - 3.5µ. The max. adjacent fiber height difference is 0.2µm and for all fibers 0.3µm. All system components (modules, trunk cables and patch cords) are co-ordinated for the reaching of the performance particularly. The fan-out unit is optimized for tML® - Cable Mounting Bracket for Fan-out Units. The module is marked with sequential serial number and article number. ***FO Connectors The end faces of the connectors are optimized by means of Lasercleaving and machine polish. The MPO/MTP® plug has a defined fiber height of 1 - 3.5µ. The max. adjacent fiber height difference is 0.2µm and for all fibers 0.3µm. Connector: Type MPO/MTP® APC Male Push Pull Locking with Elite Pins (green) Ferrule 24 Fiber SM Elite® ferrule, PPS Boot colour Red Temperature range -40°C to +75°C Manufacturer tde/US Conec Optical Performance: Fiber Type Wavelength Insertion loss typ. Insertion loss max. Return loss min. 9/125µ OS2 MPO/MTP®APC 1550 nm ≤ 0.10 dB 0.25 dB 75 dB ***FO Fan-Out Fan-out length 50 mm Ø Fan-out approx 16 - 19 mm Ø Single unit 3.0 mm Single unit length 78 ± 5 cm (not stepped) ***FO Cables Mechanical characteristics: Temperature range Storage -25 to +70°C, IEC 60794-1-22 F1   Pulling in -10 to +50°C   Operation -25 to +60°C Tensile performance IEC 60794-1-21 E1 Crush resistance IEC 60794-1-21 E3 Impact IEC 60794-1-21 E4 Repeated bending IEC 60794-1-21 E6 Torsion IEC 60794-1-21 E7 Bend IEC 60794-1-21 E11 Water penetration IEC 60794-1-22 F5 General characteristics: Sheath colour green, similar to RAL 6016 Zero halogen, no corrosive gases IEC 60754-1/-2, EN 60754-1/-2, VDE 0482-754-1/-2 Flame propagation IEC 60332-1-2, EN 60332-1-2, VDE 0482-332-1-2 Flame spread IEC 60332-3-24, EN 50266-2-4, VDE 0482-266-2-4 Smoke density IEC 61034-1/-2, EN 61034-1/-2, VDE 0482-1034-1/-2 Reaction to fire (Euroclasses) EN 13501-6: Eca Cabletype Universal U-DQ(ZN)BH for indoor and outdoor use   non metallic, dry interstices, rodent protection, flame retardant, in accordance with IEC 60332.1 and IEC 60332.3 C Fibertype Corning E9/125 G.652.D No. of fibers 96 Loose tube 8 Sheath ø 13.5 mm Weight 186 kg/km Bending radius 205 mm Tensile load short term 9.000 N Tensile load continuous 5.000 N Crush resistance short term 5.000 N Crush resistance continuous 3.000 N Fire load 808 kWh/km   3200 MJ/km Length tolerances (prefabricated with plugs): Tolerances for lengths up to 40m ± 100 cm Tolerances for lengths up to 100m ± 100 cm Tolerances for lengths from 100m ± 2% QS-Managementsystem nach ISO 9001/2008, ISO 14001 und TL 9000 Art.-Nr.: TML-M2P/M2P09B96E-Axx Hersteller: tde - trans data elektronik GmbH Stück_____________ Einzelpreis__________ Gesamtpreis__________