Liefern und montieren von:

tML® 24 - FO Trunk Cable 4x 24F MPO w. Pins/4x 24F MPO w. Pins 96G50/125µ OM3 LSHF Type
A, Length: xx in m

**tML® 24

tML® 24 is a patented, modular cabling system consisting of the three key components
module, trunk cable and rack mount enclosure. The system components are 100 percent
manufactured, pre-assembled and tested in Germany. They enable plug-and-play installation
on site – especially in data centres, but also in industrial environments – within the
shortest possible time. Heart of the system are the rear MPO/MTP® 24 fiber and Telco
connectors, which can be used to connect at least six or twelve ports at a time.
Depending on the module configuration, transfer rates of up to 400G are currently
possible with SR4. The fibre optic and TP modules can be used together in a module
carrier with a very high port density. The tde offers its tML® cabling system as a proven
tML® standard system and in the highly innovative variants tML®Xtended and now tML® 32
for extreme scalability and very easy migration to higher transmission rates such as 40G,
100G, 200G and 400G.



**tML® - tde Modular Link

tML® is a patented, modular cabling system consisting of the three key components module,
trunk cable and rack mount enclosure. The system components are 100 percent manufactured,
pre-assembled and tested in Germany. They enable plug-and-play installation on site –
especially in data centres, but also in industrial environments – within the shortest
possible time. Heart of the system are the rear MPO/MTP® and Telco connectors, which can
be used to connect at least six or twelve ports at a time. Depending on the module
configuration, transfer rates of up to 200G are currently possible with SR4. The fibre
optic and TP modules can be used together in a module carrier with a very high port
density. The tde offers its tML® cabling system as a proven tML® standard system and in
the highly innovative variants tML® Xtended, tML® 24 System and now tML® 32 System for
extreme scalability and very easy migration to higher transmission rates such as 40G,
100G, 200G and 400G.



**tML® 24 - FO Trunk Cables MPO/MTP®

The tML® - FO trunk cable is intended for the connection of two tML®24 - FO Modules.

**TECHNISCHE_DATEN

The tML®- FO trunk cable is preterminated with MPO/MTP® connectors on both ends. The end
faces of the connectors are optimized by means of Lasercleaving and machine polish. The
MPO/MTP®plug has a defined fiber hieght of 1 - 3.5µ. The max. adjacent fiber height
difference is 0.2µm and for all fibers 0.3µm. All system components (modules, trunk
cables and patch cords) are co-ordinated for the reaching of the performance
particularly. The fan-out unit is optimized for tML® - Cable Mounting Bracket for Fan-out
Units. The module is marked with sequential serial number and article number.

***FO Connectors

The end faces of the connectors are optimized by means of Lasercleaving and machine
polish. The MPO/MTP® plug has a defined fiber height of 1 - 3.5µ. The max. adjacent fiber
height difference is 0.2µm and for all fibers 0.3µm.

Connector:

Type               MPO/MTP® Male Push Pull Locking with Elite Pins (aqua)
Ferrule            24 Fiber MM Elite® ferrule, PPS
Boot colour        Red
Temperature range  -40°C to +75°C
Manufacturer       tde/US Conec

Optical Performance:

Fiber        Type     Wavelength Insertion loss typ. Insertion loss max. Return loss min.
50/125µ OM3  MPO/MTP® 850 nm     ≤ 0.20 dB           0.35 dB             25 dB

***FO Fan-Out

Fan-out length      50 mm
Ø Fan-out           approx 16 - 19 mm
Ø Single unit       3.0 mm
Single unit length  78 ± 5 cm (not stepped)



QS-Managementsystem nach ISO 9001/2008, ISO 14001 und TL 9000

Art.-Nr.:		TML-M2P/M2P50B96G3Axx
Hersteller:		tde - trans data elektronik GmbH


Stück_____________               Einzelpreis__________              Gesamtpreis__________