Liefern und montieren von: FO Universal Cable 96x E2000 APC/96x E2000 APC 96E9/125µ OS2 LSHF, Length: xxxx **tde - Fiber Optic Assemblies The tde patch  and trunk cables are manufactured completely at the German facility in Ohrte. Production processes at tde meet the latest standards, and the company has one of the most up-to-date fiber optic assembly houses in Europe. Fiber optic patch cables and trunk cables are manufactured in many different configurations using highly automated processes on two independent mass production lines. The range of products on offer encompasses the entire spectrum of connector types available on the market. Production capacity is around 100,000 fiber optic connectors per month, and this can be ramped up easily whenever required. To guarantee consistently top quality, only the best components from renowned vendors are used. All tde production staff have the necessary qualifications and education, and have been well trained in using specialist technical equipment such as laser cleavers and glue-dispensing robots. Each cable application is subjected to a full test procedure comprising interferometer measurements, insertion loss and return loss measurements and a final visual inspection to ensure that only 100% error-free products are shipped to the customer. Products made by tde perform at least internationally accepted quality standards and norms. The quality management system is ISO 9001, ISO 14001 and TL9000 certified.  **FO Trunk Cables Premium **TECHNISCHE_DATEN ***FO Connectors Type E2000 APC Ferrule Ceramic Ferrule Hole 125.5 µ Ferrule Concentricity ≤ 0.6 µ Connector colour Green Lever Colour Green Boot colour Green Manufacturer RDM Optical performance: Fiber Type Wavelength Insertion loss typ. Insertion loss max. Return loss min. 9/125µ E2000 APC 1550 nm ≤ 0.10 dB 0.25 dB 75 dB ***FO Fan-Out Fan-out head 155 mm Longest Fiber 1230 mm Shortest fiber 530 mm Parallel fibers 96 Max. Ø allocation 51 mm Wide of the panel inclusion 41 mm Max. panel thickness for inclusion 2 mm ***FO Cables Mechanical characteristics: Temperature range Storage -25 to +70°C, IEC 60794-1-22 F1   Pulling in -10 to +50°C   Operation -25 to +60°C Tensile performance IEC 60794-1-21 E1 Crush resistance IEC 60794-1-21 E3 Impact IEC 60794-1-21 E4 Repeated bending IEC 60794-1-21 E6 Torsion IEC 60794-1-21 E7 Bend IEC 60794-1-21 E11 Water penetration IEC 60794-1-22 F5 General characteristics: Sheath colour green, similar to RAL 6016 Zero halogen, no corrosive gases IEC 60754-1/-2, EN 60754-1/-2, VDE 0482-754-1/-2 Flame propagation IEC 60332-1-2, EN 60332-1-2, VDE 0482-332-1-2 Flame spread IEC 60332-3-24, EN 50266-2-4, VDE 0482-266-2-4 Smoke density IEC 61034-1/-2, EN 61034-1/-2, VDE 0482-1034-1/-2 Reaction to fire (Euroclasses) EN 13501-6: Eca Cabletype Universal U-DQ(ZN)BH for indoor and outdoor use   non metallic, dry interstices, rodent protection, flame retardant, in accordance with IEC 60332.1 and IEC 60332.3 C Fibertype Corning E9/125 G.652.D No. of fibers 96 Loose tube 8 Sheath ø 13.5 mm Weight 186 kg/km Bending radius 205 mm Tensile load short term 9.000 N Tensile load continuous 5.000 N Crush resistance short term 5.000 N Crush resistance continuous 3.000 N Fire load 808 kWh/km   3200 MJ/km Length tolerances (prefabricated with plugs): Tolerances for lengths up to 40m ± 100 cm Tolerances for lengths up to 100m ± 100 cm Tolerances for lengths from 100m ± 2% QS-Managementsystem nach ISO 9001/2008, ISO 14001 und TL 9000 Art.-Nr.: P-E2A/E2A09B96Exxxx Hersteller: tde - trans data elektronik GmbH Stück_____________ Einzelpreis__________ Gesamtpreis__________