Liefern und montieren von:

tML® - FO patch cord both sides 1x MPO/MTP® Female 12E9/125µ OS2 LSOH, Type B, Length: xxx

**tML® Xtended

tML® Xtended is a patented, modular cabling system consisting of the three key components
module, trunk cable and rack mount enclosure. The system components are 100 percent
manufactured, pre-assembled and tested in Germany. They enable plug-and-play installation
on site – especially in data centres, but also in industrial environments – within the
shortest possible time. Heart of the system are the rear MPO/MTP® 12 fiber and Telco
connectors, which can be used to connect at least six or twelve ports at a time.
Depending on the module configuration, transfer rates of up to 200G are currently
possible with SR4. The fibre optic and TP modules can be used together in a module
carrier with a very high port density. The tde offers its tML® cabling system as a proven
tML® standard system and in the highly innovative variants tML® 24 system and now tML® 32
system for extreme scalability and very easy migration to higher transmission rates such
as 40G, 100G, 200G and 400G.



**tML® - tde Modular Link

tML® is a patented, modular cabling system consisting of the three key components module,
trunk cable and rack mount enclosure. The system components are 100 percent manufactured,
pre-assembled and tested in Germany. They enable plug-and-play installation on site –
especially in data centres, but also in industrial environments – within the shortest
possible time. Heart of the system are the rear MPO/MTP® and Telco connectors, which can
be used to connect at least six or twelve ports at a time. Depending on the module
configuration, transfer rates of up to 200G are currently possible with SR4. The fibre
optic and TP modules can be used together in a module carrier with a very high port
density. The tde offers its tML® cabling system as a proven tML® standard system and in
the highly innovative variants tML® Xtended, tML® 24 System and now tML® 32 System for
extreme scalability and very easy migration to higher transmission rates such as 40G,
100G, 200G and 400G.



**tML® Xtended - FO Patch cord MPO/MTP® SR4

The tML® - FO patch cord is intended for the connection of two tML®- FO Modules.

**TECHNISCHE_DATEN

The tML®- FO patch cord is preterminated with MPO/MTP®connectors on both ends. The Cable
is very slim and flexible. The end faces of the connectors are optimized by means of
Lasercleaving and machine polish. The MPO/MTP®plug has a defined fiber hieght of 1 -
3.5µ. The max. adjacent fiber height difference is 0.2µm and for all fibers 0.3µm. All
system components (modules, trunk cables and patch cords) are co-ordinated for the
reaching of the performance particularly. The module is marked with sequential serial
number and article number.

Cable             Round cable, loose tube, LSOH, yellow
Nominal diameter  3.0 mm
Connectors        MPO/MTP®APC Female Push Pull (green)
Pin out           Type B
Tests             Interferometer, Insertion Loss, Return Loss and Visual Final Inspection;
                  all measured values are electronically archived
                  QS-Managementsystem ISO 9001, ISO 14001 and TL 9000

xxx - stands for the cable length in meters (every length available)

***FO Connectors

The end faces of the connectors are optimized by means of Lasercleaving and machine
polish. The MPO/MTP® plug has a defined fiber height of 1 - 3.5µ. The max. adjacent fiber
height difference is 0.2µm and for all fibers 0.3µm.

Connector:

Type               MPO/MTP® Female Push Pull Locking (Green)
Ferrule            12 Fiber SM Elite® ferrule, PPS
Boot colour        Black
Temperature range  -40°C bis +75°C
Manufacturer       tde/US Conec

Optical Performance:

Fiber       Type        Wavelength     Insertion loss    Insertion loss    Return loss min.
                                       typ.              max.              
9/125µ OS2  MPO/MTP®APC 1310 / 1550 nm ≤ 0.10 dB         0.20 dB           75 dB

***FO Cables

Standards         EN 50173-5
                  IEC 60794-2-20
                  ISO/IEC 24764
Flame resistance  IEC 60332-1-2
                  IEC 60332-2-2
                  IEC 60754-1
                  IEC 60754-2
                  IEC 61034

Cable construction:

Type              IVH12E09
Loose tube        12 coated fibers within PVC-core tube
Fiber type        SM-G652D, 9/125µ, Corning SMF-28e+, OS2
Strength members  Aramid yarn
Outer jacket      LSZH (Halogen free, low smoke, flame retardant thermoplastic compound)
Jacket color      Yellow, RAL 1021
Identification    "t d e – IVH12E09–MPO LSZH" and sequential meter marking + Lot number

Physical properties:

Outer diameter cable                                  3.0 ± 0.1 mm
Diameter PVC-core tube                                1.8 ± 0.1 mm
Wall thickness PVC-core tube                          0.35 mm – 0.40 mm
Max. tensile load                                     300 N
Min. bending radius                                   30 mm
Temperature range (storage, installation, operation)  -20°C to +70°C



QS-Managementsystem nach ISO 9001/2008, ISO 14001 und TL 9000

Art.-Nr.:		TML-MP/MP09I12E-Bxxx
Hersteller:		tde - trans data elektronik GmbH


Stück_____________               Einzelpreis__________              Gesamtpreis__________