Liefern und montieren von: tML® HD - FO Breakout Module 2x MPO/MTP® with Pins/8x LC Duplex w. shutter 50/125µ OM4, SR4 **tML® Xtended tML® Xtended is a patented, modular cabling system consisting of the three key components module, trunk cable and rack mount enclosure. The system components are 100 percent manufactured, pre-assembled and tested in Germany. They enable plug-and-play installation on site – especially in data centres, but also in industrial environments – within the shortest possible time. Heart of the system are the rear MPO/MTP® 12 fiber and Telco connectors, which can be used to connect at least six or twelve ports at a time. Depending on the module configuration, transfer rates of up to 200G are currently possible with SR4. The fibre optic and TP modules can be used together in a module carrier with a very high port density. The tde offers its tML® cabling system as a proven tML® standard system and in the highly innovative variants tML® 24 system and now tML® 32 system for extreme scalability and very easy migration to higher transmission rates such as 40G, 100G, 200G and 400G. **tML® 24 tML® 24 is a patented, modular cabling system consisting of the three key components module, trunk cable and rack mount enclosure. The system components are 100 percent manufactured, pre-assembled and tested in Germany. They enable plug-and-play installation on site – especially in data centres, but also in industrial environments – within the shortest possible time. Heart of the system are the rear MPO/MTP® 24 fiber and Telco connectors, which can be used to connect at least six or twelve ports at a time. Depending on the module configuration, transfer rates of up to 400G are currently possible with SR4. The fibre optic and TP modules can be used together in a module carrier with a very high port density. The tde offers its tML® cabling system as a proven tML® standard system and in the highly innovative variants tML®Xtended and now tML® 32 for extreme scalability and very easy migration to higher transmission rates such as 40G, 100G, 200G and 400G. **tML® - tde Modular Link tML® is a patented, modular cabling system consisting of the three key components module, trunk cable and rack mount enclosure. The system components are 100 percent manufactured, pre-assembled and tested in Germany. They enable plug-and-play installation on site – especially in data centres, but also in industrial environments – within the shortest possible time. Heart of the system are the rear MPO/MTP® and Telco connectors, which can be used to connect at least six or twelve ports at a time. Depending on the module configuration, transfer rates of up to 200G are currently possible with SR4. The fibre optic and TP modules can be used together in a module carrier with a very high port density. The tde offers its tML® cabling system as a proven tML® standard system and in the highly innovative variants tML® Xtended, tML® 24 System and now tML® 32 System for extreme scalability and very easy migration to higher transmission rates such as 40G, 100G, 200G and 400G. **tML® Breakout - LWL Module MPO/MTP® The tML® HD Breakout Module is intended for the installation in the tML® Rack Mount Enclosure 1U (for 8 x Modules). The tML® HD Breakout Module can be used only in combination with the tML®HD patch cord. A special cleaning tool is required to clean the adapters with shutter. **TECHNISCHE_DATEN The end faces of the connectors are optimized by means of Lasercleaving and machine polish. The MPO/MTP®plug has a defined fiber height of 1 - 3.5µ. The max. adjacent fiber height difference is 0.2µm and for all fibers 0.3µm. All system components (modules, trunk cables and patch cords) are co-ordinated for the reaching of the performance particularly. The module is marked with sequential serial number and article number. The modules are ROHS compliant. Entry 2 x MPO/MTP®Male Adapter (magenta) front Exit 8 x LC Duplex Adapter with self-closing shutter (magenta) front Tests Interferometer, Insertion Loss, Return Loss and Visual Final Inspection; all measured values are electronically archived   QS-Managementsystem ISO 9001, ISO 14001 and TL 9000 Box Galvanized steel sheet Front Panel Stainless steel Dimensions 110 x 108 x 20 mm ***FO Adapters When the connector is inserted into the adapter it compress the springs, opening the internal shutter. The internal shutter opens, and due to the special design of the shutter, it will not touch the ferrule end face. As the connector is removed from the adapter, the shutter spring automatically returns the internal shutter to the closed position. Type LC Duplex Application Multimode OM4 Design One-Piece without flange Connector style SC simplex Color Magenta Housing material Plastic Sleeve Zirkonia Staight Split Self-closing shutter material Metal Self-closing shutter protection Dust an laser light Manufacturer tde ***FO Connectors Connector Type LC Unibody Simplex Housing Plastic, Magenta Ferrule Zirkonia Staight Split, Spring-loaded Axially Ferrule Hole 126 µ Mating Cycles 1.000 Operating Temperature -40°C up to +75°C Strain Relief to 100 N Manufacturer tde Optical performance: Fiber Type Wavelength Insertion loss typ. Insertion loss max. Return loss min. 50/125µ OM4 LC 850 / 1300 nm ≤ 0.07 dB 0.15 dB 35 dB ***FO Adapters Type MPO/MTP® Application Multimode OM4 Design without Flange Connector style SC Simplex Key Orientation Type A, Key up/down Color Magenta Material Plastic Sleeve -- Shutter -- Standards IEC 61754-7 TIA 604-5 Manufacturer US Conec ***FO Connectors The end faces of the connectors are optimized by means of Lasercleaving and machine polish. The MPO/MTP® plug has a defined fiber height of 1 - 3.5µ. The max. adjacent fiber height difference is 0.2µm and for all fibers 0.3µm. Connector: Type MPO/MTP® Male Push Pull Locking with Elite Pins (magenta) Ferrule 12 Fiber MM Elite® ferrule, PPS Boot colour Black Manufacturer tde/US Conec Optical Performance: Fiber Type Wavelength Insertion loss typ. Insertion loss max. Return loss min. 50/125µ OM4 MPO/MTP® 850 /1300 nm ≤ 0.12 dB 0.25 dB 35 dB ***FO Fiber Type Draka OM4 50/125µm bend-insensitive multimode fiber (C32) Standards and Norms IEC 60793-2-10: type ITU G.651.1 TIA/EIA-492 AAAD A1a.3   ISO/IEC 11801 category EN 60793-2-10: type A1a.3 ANSI/TIA/EIA-568.C OM4   ISO/IEC 24764 EN 50173-1 category OM4 IEEE 802.3 Optical properties: Maximum attenuation value of cable at 850 nm IEC 60793-1-40 ≤ 3.0 dB/km Maximum attenuation value of cable at 1300 nm IEC 60793-1-40 ≤ 1.0 dB/km Attenuation limit according to IEC 60793-2-10, 850 nm IEC 60793-1-40 ≤ 2.5 dB/km Attenuation limit according to IEC 60793-2-10, 1300 nm IEC 60793-1-40 ≤ 0.8 dB/km Inhomogeneity of OTDR trace for any two 1000 metre IEC 60793-1-40 Max. 0.1 dB/km fiber lengths Fiber bending loss R=7.5 mm 850/1300 nm IEC 60793-1-40 ≤ 0.2 dB / ≤ 0.5 dB Fiber bending loss R=15 mm 850/1300 nm IEC 60793-1-40 ≤ 0.1 dB / ≤ 0.3 dB Bandwidth: Overfilled (OFL) modal bandwidth at 850 nm IEC 60793-1-41 ≥ 3500 MHz*km Overfilled (OFL) modal bandwidth at 1300 nm IEC 60793-1-41 ≥ 500 MHz*km Effective Modal Bandwidth (EMB) at 850 nm IEC 60793-1-49 ≥ 4700 MHz*km Group index of refraction at 850 nm IEC 60793-1-22 1.482 Group index of refraction at 1300 nm IEC 60793-1-22 1.477 Geometrical / mechanical properties: Core diameter IEC/EN 60793-1-20 50 ± 2 µm Cladding diameter IEC/EN 60793-1-20 125.0 ± 1.0 µm Cladding non-circularity IEC/EN 60793-1-20 ≤ 0.7% Core non-circularity IEC/EN 60793-1-20 ≤ 5% Core -cladding concentricity error IEC/EN 60793-1-20 ≤ 1 µm Primary coating diameter - uncoloured IEC/EN 60793-1-21 242 ± 5 µm Primary coating diameter - coloured IEC/EN 60793-1-21 250 ± 15 µm Primary coating non-circularity IEC/EN 60793-1-21 ≤ 5% Primary coating-cladding concentricity error IEC/EN 60793-1-21 ≤ 6 µm Proof stress level IEC/EN 60793-1-30 ≥ 0.7 (≈ 1 %) GPa Typical average strip force IEC/EN 60793-1-32 1.7 N Strip force (peak) IEC/EN 60793-1-32 1.3 N ≤ Fpeak.strip ≤ 8.9 N Numerical aperture IEC/EN 60793-1-43 0.200 ± 0.015 QS-Managementsystem nach ISO 9001/2008, ISO 14001 und TL 9000 Art.-Nr.: TML-M08LCDS/MPP50G4 Hersteller: tde - trans data elektronik GmbH Stück_____________ Einzelpreis__________ Gesamtpreis__________