Liefern und montieren von:

10/100/1000Base-T (RJ-45) [100 m] to 1000Base-LX 1310nm single mode (SC)[10 km/6.2 mi.]
Link Budget: 10.5 dB

**Lantronix / Transition Networks

**Direct Attach Cables / Active Optical Cables

A simple to install, cost-effective and interoperable solution


Often used for data center short-reach interconnects, Direct Attach, Active Copper and
Active Optical Cables are an indispensable part of any network.


Terminated with transceiver-style connectors, they are designed to be used in the same
ports as a typical SFP+ or QSFP transceiver, with no need for adapters or converters. Our
DAC and AOC cables offer compatibility with a huge range of vendors, enabling the
connectivity you need within the Top of Rack and End of Row environments.


• 10G, 25G, 40G & 100G product solutions
• Seamless interoperability with network equipment
• Multi-code options enabling different OEM vendors at each end of the cable
• 4x breakout cables, 40G QSFP+ to 4x 10G SFP and 100G QSFP28 to 4x 25G SFP28
• Fast Delivery, Custom solutions
• Compatible with Over 90 Systems
• Savings of up to 70%



**Converters and Device Servers

***Features


• Copper and Fiber Auto-Negotiation
• Switch Selectable Speeds
• Auto-MDI/MDIX
• Link Pass Through
• Remote Fault Detect
• Pause
• Automatic Link Restoration
• IEEE 802.1p QoS, IPv4 TOS/DiffServ, IPv6 traffic class
• IEEE 802.1Q Port VLAN, tagging and doubling tagging (Q in Q)
• Field Upgradeable Firmware
• Virtual Cable Test on UTP port
• Unidirectional data transmission
• Bandwidth Allocation
• DMI, digital diagnostics per SFF-8472
• RMON counters for each port
• Can be used in any ION Platform Chassis
• Secure unidirectional transmission
• Standards based, will link with any standard 10/100/1000Base-T and any standard
1000Base-SX or -LX ports


**TECHNISCHE_DATEN


***Standards

***


• IEEE 802.3
• IEEE 802.3ab
• IEEE 802.3u
• IEEE 802.3z
• IEEE 802.1p
• IEEE 802.1Q


***

***Data Rate

***


• 10/100/1000 Mbps; Layer 2


***

***Max Frame Size

***


• 10,240 Bytes (jumbo frame support)
• 1,632 Bytes when linked to an xGFEB10xx-120


***

***Switch

***


• SW1: TP Auto-Negotiation
• SW2: TP Speed
• SW3: TP Duplex
• SW4: Link Pass Through
• SW5: Fiber Duplex
• SW6: Unused


***

***Jumper

***


• Hardware/Software mode, Auto-MDI/MDIX


***

***Status LEDs

***


• PWR (Power): ON = Connection to powered backplane
• LACT (Fiber Link): ON=Fiber link, Blinking=activity
• UTP Duplex/Link: Orange=half duplex link,
• Blinking = half duplex activity, Green = Full duplex link,
• Blinking =Full duplex activity,
• Off = 10 Mbps operation (or no link),
• Orange = 100 Mbps operation, Green = 1000 Mbps operation


***

***Dimensions

***


• Width: 0.86” [22 mm]
• Depth: 6.5” [165 mm]
• Height: 3.4” [86 mm]


***

***Power Consumption

***


• 3.6 Watts, 300mA @ 12 VDC


***

***Environment

***


• Environment specs are dependent on the chassis chosen
• Operating: 0°C to 50°C
• Humidity: 5% to 95% (non-condensing)
• Altitude: 0 – 10,000 ft.


***

***Weight

***


• 1 lb. [0.45 kg]


***

***MTBF

***


• Greater than 250,000 hours (MIL-HDBK-217F)
• Greater than 667,500 hours (Bellcore)


***

***Certifications

***


• CISPR/EN55022 Class A, EN55024, EN61000,
• FCC Class A, CE Mark


***

***Warranty

***


• Lifetime









QS-Managementsystem nach ISO 9001/2008, ISO 14001 und TL 9000

Art.-Nr.:		C3210-1014
Hersteller:		tde - trans data elektronik GmbH


Stück_____________               Einzelpreis__________              Gesamtpreis__________