Liefern und montieren von: tML® - TP Trunk Cable both ends RJ45 DC 6fold Module w. LID (one enclosed) Cat.6A UC Future 24x2xAWG26 LSHF for Rack Mount Enclosure 1U extendable **tML® 24 tML® 24 is a patented, modular cabling system consisting of the three key components module, trunk cable and rack mount enclosure. The system components are 100 percent manufactured, pre-assembled and tested in Germany. They enable plug-and-play installation on site – especially in data centres, but also in industrial environments – within the shortest possible time. Heart of the system are the rear MPO/MTP® 24 fiber and Telco connectors, which can be used to connect at least six or twelve ports at a time. Depending on the module configuration, transfer rates of up to 400G are currently possible with SR4. The fibre optic and TP modules can be used together in a module carrier with a very high port density. The tde offers its tML® cabling system as a proven tML® standard system and in the highly innovative variants tML®Xtended and now tML® 32 for extreme scalability and very easy migration to higher transmission rates such as 40G, 100G, 200G and 400G. **tML® - tde Modular Link tML® is a patented, modular cabling system consisting of the three key components module, trunk cable and rack mount enclosure. The system components are 100 percent manufactured, pre-assembled and tested in Germany. They enable plug-and-play installation on site – especially in data centres, but also in industrial environments – within the shortest possible time. Heart of the system are the rear MPO/MTP® and Telco connectors, which can be used to connect at least six or twelve ports at a time. Depending on the module configuration, transfer rates of up to 200G are currently possible with SR4. The fibre optic and TP modules can be used together in a module carrier with a very high port density. The tde offers its tML® cabling system as a proven tML® standard system and in the highly innovative variants tML® Xtended, tML® 24 System and now tML® 32 System for extreme scalability and very easy migration to higher transmission rates such as 40G, 100G, 200G and 400G. **tML® Xtended tML® Xtended is a patented, modular cabling system consisting of the three key components module, trunk cable and rack mount enclosure. The system components are 100 percent manufactured, pre-assembled and tested in Germany. They enable plug-and-play installation on site – especially in data centres, but also in industrial environments – within the shortest possible time. Heart of the system are the rear MPO/MTP® 12 fiber and Telco connectors, which can be used to connect at least six or twelve ports at a time. Depending on the module configuration, transfer rates of up to 200G are currently possible with SR4. The fibre optic and TP modules can be used together in a module carrier with a very high port density. The tde offers its tML® cabling system as a proven tML® standard system and in the highly innovative variants tML® 24 system and now tML® 32 system for extreme scalability and very easy migration to higher transmission rates such as 40G, 100G, 200G and 400G. **tML® - TP Trunk Cables **TECHNISCHE_DATEN xx Length in m ***TP RJ45 Modules System platforms tML®/ tSML   4x tBL® - 6fold Modules can be integrated in a tSML - TP Module.   1x tBL® - 6fold Module can be integrated in a tML® - TP Module. Equipping 6x tBL® RJ45 DC Module Cat.6A ***TP RJ45 Modules Mechanical properties: Type RJ45 Jack shielded LID Connector standard IEC 60603-7-5-1 Installation dimension 19.3 x 14.7 mm Mating force ≤30 N Mating cycles (RJ45 side) ≥750 Mating cycles (opposite side) ≥100 Housing material nickel-plated die-cast zinc Insulation components material PC aqua opak Gold plating in contact area 30 µ" Contacting AWG 27-22 Cable diameter 5-10 mm Environmental requirements: Connection class IP20 Temperature range -40°C to +70°C Electrical properties: Contact resistance ≤20 mΩ Insulation resistance between contacts ≥500 MΩ Dielectric withstanding voltage contact – contact ≥1000 V DC/AC Dielectric withstanding voltage contact – screen -- Current-carrying capacity at 50°C 1.25 A PoE+ per IEEE 802.3at PoE+ Transmission characteristics: 10 GbE supported Cat.6A ISO/IEC 11801 AM1 and AMD2, Link length: >1 m LiD Function: supply voltage 12 V DC lightdetection ≥200 m light exits ≤20 ***TP Termination Block Construction plastic with insulation displacement connection Gold plating termination block 30 µ" Color transparent white Application Flex cable AWG 26 - AWG 27, alternative AWG 26 Solid Wire   Plug bears small flag-like installation guide with color codes for pin-out according to EIA/TIA 568 A and B. ***TP Cable Construction: Type UC FUTURE COMPACT AWG26/1 Cat.7 S/FTP 24P Conductor Bare copper wire, diamter 0.4 mm (AWG26) Insulation Foam-skin PP, diameter 1.0 mm Twisting 2 insulated wires to the pair Pair screening Pet-Al foil around each pair Stranding 6 (5+1) bundles with 4 foiled pairs blue, orange, green, brown   Coloured tapes are around each bundle Screen Tinned copper braid 85% coverage Sheath LSHF-FR, diameter 13.9 mm Application IEEE 802.3: 10Base-T; 100Base-T; 10GBase-T, ISDN; xDSL IEEE 802.5 16 MB; ISDN; TPDDI; ATM155Mbit/s The conductor diameter is smaller compared to the standard installation cables. This leads to an increased attenuation and therefore the operating distance is reduced (60m instead of 90m installation cable in standard permanent link). Standards IEC 61156-6 work area cable ISO/IEC 11801 2nd ed. EN 50173-5 EN 50288-4-2 Flame resistance PVC IEC 60332-1 LSHF-FR IEC 60332-3-24; IEC 60754-2; IEC 61034 ; EN 50399 Class Dca Mechanical properties: Minimum bending radius Without load ≥ 55 mm   With load ≥ 110 mm Temperature range  During operation -20°C up to +60°C   During installation  10°C up to +40°C Electrical properties at 20°C: Loop resistance   ≤ 280 Ω/km Resistance unbalance   ≤ 2% Test voltage core/core 1000 VDC 1 min   core/screen 1000 VDC 1 min Capacitance 800 Hz Nom. 44 nF/km Capacitance unbalance   ≤ 1600 pF/km Impedance 100 MHz 100 Ω± 5 Ω Nominal velocity of propagation   ca. 76% Insulation resistance 500 V ≥ 2000 MΩkm Transfer impedance at 1 MHz ≤ 5 mΩ /m   at 10 MHz ≤ 5 mΩ /m   at 30 MHz ≤ 10 mΩ /m Electrical Data (nominal) acc. to Cat.7 (at 20°C): F MHZ Atten- uation NEXT dB PS- NEXT dB ELFEXT dB/100m PS- ELFEXT Return loss dB dB/10m dB/100m 1.0 0.3 90 87 80 77 23 4.0 0.6 90 87 80 77 24 10.0 1.0 90 87 80 77 25 16.0 1.3 90 87 76 73 25 20.0 1.4 90 87 74 71 25 31.2 1.8 90 87 70 67 25 62.5 2.6 90 87 64 61 23 100.0 3.2 87 84 60 57 21 125.0 3.6 85 82 58 55 20 155.5 4.0 84 81 56 53 19 175.0 4.3  83 80 55 52 19 200.0 4.6 82 79 54 51 18 250.0 5.1 81 78 52 49 18 300.0 5.6 80 77 50 47 17 450.0 6.9 77 74 47 44 17 600.0 7.9 75 72 44 41 17 Technical Data: Designation J-02YS(ST)CH Type 24x2x0.4PiMF Outer diameter 13.9 mm Fire load 2.171 MJ/km Fire load 0.603 kWh/m Reaction to Fire Dca-s2, d2, a1 Weight 230 kg/km Copper content 115 kg/km Tensile force 500 N QS-Managementsystem nach ISO 9001/2008, ISO 14001 und TL 9000 Art.-Nr.: TML-MS6RJ45C26-xxLUA8 Hersteller: tde - trans data elektronik GmbH Stück_____________ Einzelpreis__________ Gesamtpreis__________